AMAZING TIPS FOR GLASS ENGRAVING!!!!!
Engraving
is the practice of making designs onto a hard, usually flat surfaces.
Engraving is basically done to make the material look beautiful. One
of the most trending engravings is Glass Engraving.
Glass
engraving is not a
new process . Many people have been engraving glass from decades,
some as their hobby & others for making money. CO2 laser
engravers
help you to engrave flat
materials including
window
glass or mirrors, round workpieces such as wine or champagne glasses,
and conical items like bottles and much more.
Engraving
the cast glass is considered to be a good choice & it costs less
whereas engraving hand-blown glasses or crystal glasses are
expensive.
With
time & with new methods, glass engraving becomes an easy task.
In
this article, we will tell you the better method in practising
the art of the glass engraving.
-
THERE ARE SOME GLASS GRAVING TOOLS WHICH WE CAN USE FOR ENGRAVING:-
-
Diamond Ball Burrs
-
Green Silicon Carbide Stone Burrs
-
White Arkansas Stone Burrs
-
Grey or Brown Rubber Silicone Burrs
-
Silicone Abrasives
Steps
to be followed before engraving the glass:
I.
For the first step, you have to choose the glass object to engrave.
The object can be a window, flower vase, key chain or glasses for
drinks, etc.
II.
For the second step, you should decide which stencils that you will
use. Place the stencils accurately in the right place.
III.
Depending on the size and the shape of the glass that you use, you
may need to use the clamp to hold it steadily. Don’t hold the glass
too tightly with a clamp.
IV.
Draw on the outer surface of the glass using the stencil & the
wax marker.
Laser
engraving
and cutting
are the two interesting things that can help
you to create a unique and attractive design on any material.
1.
LASER
ENGRAVING
- some methods of doing laser engraving are:
Moist
paper towel
Before
you start engraving:
-
Apply a moist single-layer paper towel to the glass, it will prevent the engraving area from becoming rough and leads to a clear, white engraving result.
-
Don't let air bubble to enter, if an air bubble enters, it will overlap the engraved image.
Application
tape:
Apart
from moist
paper towels, application tape can also be used:
-
To prevent the surface from roughening.
-
With application tape, however, the engraving colour is rather greyish and not bright white.
-
Once engraving is done, clean the glass to remove any adhesive residue.
Engraving
without auxiliary materials:
-
Moist paper towel or application tape are not required for processing.
-
You can change the colour in the graphic from 100% black to about 70% grey to minimize the effect of heat on a large surface.
-
With this roughness results less.
2.
CUTTING -
-
A laser cutter uses a laser beam for cutting or etch the material.
-
It set the beam to a focal length & with that craft the images on glass.
At
last, we can say with the help of glass engraving we can make our
item more personalized and attractive.
if
you want to get any idea about glass engraving then you can contact
our team of experts. They will assist you in the right way and
provide you with the desired results.
Comments
Post a Comment